User manual

G5 Owner‘s Manual | 67
14.4.4 PARAMETER DETAIL MULTI FX
EFFECTS [MULTI FX] [F1]
Multi FX Parameters
Multi Effects Mutual Parameters
Parameter
Value Range
Description
Level
%
Adjusts the balance between Dry and Wet = On/OFF signal sent to
the mixer.
Send to Room Reverb
%
When Room Reverb is active, Multi Effects can sound self-sufficient
and out of place. With this parameter, you can add room sound to a
multi-effect for an integrated sound of the drum kit.
A low value reduces the room component, while a high value em-
phasises the room component in the mix.
Note
These parameters are not part of the preset management but are stored as drum kit
parameters using the direct method (save the drum kit).