User manual

G5 – Owner‘s Manual | 45
HIGH LEVEL
Upper, accepted level of the input signal. In conjunction with Threshold, it defines the limits of the
range of the input signals.
Signals with levels between Threshold and High Level generate MIDI notes with velocity values
between 8 and 127. All signals with levels above High Level generate MIDI notes with velocity 127.
Values between Treshold and High Level define the possible dynamic range.
SCAN TIME
The sampling time of the input signal. Increasing it will worsen the latency and improve the accu-
racy.
Generally, for rubber pads/cymbals, setting Scan Time to 20 (2ms) is sufficient for correct signal
level detection. For mesh pads, you may need to increase Scan Time to 30-50 - the larger the
mesh type heads, the higher the Scan Time required for correct signal level detection.
Scan Time Parameter Value range: 10-100.