User manual

G3 – Owner‘s Manual | 91
11.3.2 LOAD – WAVE/SOUND
In this menu you can load up to 100 of your own samples from your USB stick into the module.
The total memory is limited to 111MB.
MENU  USB Load/Save  Wave/Sound
Load Wave/Sound
Selecting the sample
Select your sample with the dial [5] or the navigation keys
[8]. Use the [PLAY/STOP] or [PREVIEW] key to preview the
sound.
Load the sample by pressing [F1] or [ENTER].
Name
After loading, you can give the file a new name to make it
easier to find the sample in the Instrument menu.
Exiting the level
Press [F3 to exit the level or any menu key to exit the
entire menu.
For details on naming and Load/Save, please refer to the
relevant chapter:
Loading and saving from presets.