User manual

G3 – Owner‘s Manual | 53
Under the direct access [SETUP] you can determine what type of pad or cymbal is placed on the input.
Example: Cymbal = Edge, Bow, Bell
10.1 SETTINGS
TRIGGER SET  [F1]
Settings
In the SETTINGS you can adjust your trigger and all the
associated functions to your wishes.
In the upper area you see the selected instrument. With the
dial [6] [<ZONE>] you can choose between the zones of the
instrument (HEAD I RIM; BELL I EDGE I BOW).
The following functions are available for the selected
trigger:
X-Talk
Press [F1] to adjust the trigger behaviour in case of cross-
talk.
Preset
Press [F2] to access the presets. Here you can load and save
your own trigger presets.
Exit the menu
Press [F3] to go back one step.
Parameter
The following values are available for selection:
GAIN, THRESHOLD, HIGH LEVEL, SCAN TIME, RETRIGGER MASK, TRIGGER TYPE, CURVE ID, DYN LEVEL, DYN TIME.
Use the dial [5] to select the corresponding parameter and change the value with the dial [7].
For more information, see the following chapter.