User manual

102 |G3 – Owner’s Manual
11.5.1 ROUTING / INSTRUMENT
MENU  Master  [F2]
Routing
You can send any input signal to a variety of outputs built
into the G3 using the routing matrix. The matrix also
controls the USB out.
In this section, you will learn how to work with each matrix.
The routing function of the G3 is divided into 2 input
categories: Routing and Routing Others. While the input
channels displayed vary, the functionality is identical. Thus,
the content of the following subchapters applies to each
matrix.
DAW
6 USB-Outs are available. Please read chapter Routing DAW.