User manual

Gas & CO jelzőkészülék

4 Installation

WARNING

Explosion, Electric shock!

Drilling work can damage lines in wall mounting.

     

or water and do not damage them!

CAUTION

Stumbling, Fall

Cables can be overlooked.

    

ne or damage anything.

• When using in mains operation, select the mounting location in such a way that

an easily accessible socket is easily reached.

• In general, choose the mounting location in such a way that other furniture or

device parts are not limited in their use and the laying of the power cable poses

no risk of accident

4.1 Assembly when using heavy gas

1. Drill 2 mounting holes at a distance of 35 mm at a suitable position shown

below.

2. Insert the dowels into the drilled holes.

3. Screw the wall bracket into the dowels using the 2 screws.

If you would like to operate the device with an emergency battery, read the chapter

  

4. Hang the device on the hook of the wall bracket.

0.3-1.0

Installation place