User manual

LCD display explained (Fig. B)
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
ON = ON
OFF = OFF
Safety instructions
Under no circumstances does the warranty cover
damage resulting from failure to observe these
instructions. Nor do we accept liability for any indirect
damage. Similarly, we can accept no liability for any
material damage or bodily injury caused by mishandling or
failure to observe the safety instructions. In these cases, no
warranty or guarantee claim may be made. In addition, for safety
and compliance reasons, you are not authorised to dismantle or
alter the device in any way. Do not plug several of these devices
into the same socket. You must unplug the timer to disconnect
the power supply. Suitable for use in dry environments only.
DGBFNLLTSSLOCZ
76
By purchasing this item, you have chosen a high-quality GEV
product. Please read these operating instructions carefully
to ensure correct operation. Keep these instructions in a
safe place so that you can refer back to them if necessary.
Operating elements (Fig. A)
1 MASTER CLEAR: Deletes all data stored in the memory,
including the current time and all programs
2 RANDOM: Switches the random function on/o
3 CLOCK:
- Sets the current time when used with the WEEK, HOUR,
MIN buttons
- Sets the device to 12 or 24-hour mode when used with the
TIMER button
- Activates the summer time function when used with the
ON/AUTO/OFF button
4 TIMER: Sets the programs when used with the WEEK,
HOUR, MIN buttons
5 ON/AUTO/OFF: Selects the timer's operating mode.
6 WEEK: Sets the week when used with the CLOCK or
TIMER button
7 HOUR: Sets the hours when used with the CLOCK or
TIMER button
8 MIN: Sets the minutes when used with the CLOCK or
TIMER button
9 RST/RCL: Reset button
10 LED: Status indicator
Digital timer LZV 6119
- 24h/12h clock
Press the CLOCK (3) and TIMER (4) buttons simultaneously
to switch between 24 and 12-hour mode. (12-hour mode = 1
AM to 12 AM & 1 PM to 12 PM). PM also appears in the display
when using 12-hour mode.
- Daylight saving time
Press the CLOCK (3) and ON/AUTO/OFF (5) buttons
simultaneously to put the time forward by 1 hour (summer
time). The symbol for summer time will appear on the right-
hand side of the display. Repeat the process to switch to
winter time.
Programming the timer
The timer can accommodate 10 programs. You can program a
switch-on time "ON" and a switch-o time "OFF" for each of
these. You can set a program for individual days of the week
or predefined blocks of days.
The following blocks of days can be programmed:
MO to SU (whole week), MO to SU (individual days), MO to
FR, SA to SU, MO to SA, MO & WE & FR, TU & TH & SA, MO
to WE, TH to SA, MO & WE & FR & SU.
It’s a good idea to write down the programs you wish to set
beforehand , as this will make them easier to input.
To enter programming mode, press button (4) once. "ON 1"
and the switch-on time of the first program will appear on the
display. If this has not been programmed, "--:--" will appear
instead of the time.
Initial activation
Plug the timer into a mains socket for approx. 14 hours to
allow the in-built reserve battery to charge.
- Master Clear/Delete all settings
Press the MASTER CLEAR (1) button with a pointed object
to delete all stored data and reprogram the timer. All symbols
(test function) will now appear on the LCD display (10) for
approx. 3 seconds, followed by 0:00:00 MO AUTO.
Setting the time
Before setting the time, switch to summer time if necessary
(+ 1h). See the "Daylight saving time" section.
- Press the CLOCK and WEEK buttons simultaneously to
set the day of the week
- Press the CLOCK and HOUR buttons simultaneously to
set the time (in hours)
- Press the CLOCK and MIN buttons simultaneously to set
the time (in minutes)
- Example:
Setting the time to 13:26 on Tuesday following a reset
- Press the CLOCK (3) and WEEK (6) buttons once
simultaneously. TU will be displayed
- Press the CLOCK (3) and HOUR (7) buttons 13 times
simultaneously. 13:00 will be displayed
- Press the CLOCK (3) and MIN (8) buttons 26 times
simultaneously. 13:26 will be displayed
AUTO = the timer is in programmed mode
S = summer time
R = random function enabled