Operation Manual

11
- HOW TO REPLACE THE HANDSETS BATTERY. \
8.0 - COMPLIANCE DECLARATION
Getronic S.r.l. Via Calcinate, 12 Gavirate, Italy hereby declares that GT970 is in compliance
with the following European Directive:
R97
All Getronic products are compatible with the vehicle’s original electronic systems.
The GT889/884 remote control handsets are in compliance with the following European
Directives as issued by the European Community:
EMCC DR. RASEC “Notified Body 0678”
R&TTE 1999/5/CE (including the directives: EN 300 220 - EN 60950)
Chairman of the board
Danilo Restelli
Varese, 19 January 2005
- Power supply: 9-16V.
- Working temperature: -40° / +85°.
- Max apllicable voltage: 36V/1minute
- Current draw - disarmed system: <800μA.
- Current draw - armed system: <1.5mA.
- Current in “SLEEP MODE”: <20μA.
- Max current for engineS immobilisations 7A.
- Max current Blinker outputs: 5A.
- Max current Led output: 25mA.
- Max current positive output: 80mA.
- Serial Output/Input monowire: 4800 Kb.
- Self-power supply: Battery 7,2V Ni-Mh - 120mA
- Alarm and Panic time: 30 seconds
9.0 - TECHNICAL DATA
WARNING!
- The battery negative terminal has to be
pointed upwards (with components) and the
positive downwards (handset bottom).
Li Li
Replace with a Lithium battery
Mod. CR2032 (3V) for GT889
Mod. CR2450 (3V) for
Take out and insert the battery
from this circuit side.
GT884
- With care lever the front case for the
printed circuit
WARNING: the batteries selling off has to always
occur in appropriate way and it has to be in
compliance with the local rules in force.
LED