User Manual

VACUUM SEALERS Care and Cleaning
CARE AND CLEANING
1.Always unplug the unit before cleaning.
2.Don't immerse the appliance in water on other liquid for
cleaning.
3.Do not use abrasive cleaners to clean, because it is easy
to scratch the surface of the appliance.
4.Wipe the outside of the appliance with a damp cloth or
sponge with mild soap if necessary.
5.To clean the vacuum chamber ,wipe away any food or liquid
with a tissue paper.
6.Dry thoroughly before using again.
AIR WAS REMOVED
FR
O
M THE BA
G
, B
U
T N
O
W AIR
HAS RE-ENTERED
1.Examine seal of bag. A wrinkle along the seal may cause leakage
and allow air to enter, Simply cut bag and reseal.
2.Sometimes moisture or food material (such as juices, grease,
crumbs, powders, etc.) along seal prevents bag from sealing
properly. Cut bag, wipe top inside of bag and reseal.
3.If you vacuum package sharp food items ,bag may have been
punctured, use a new bag if there is a hole. Cover sharp food
items with a soft cushioning material, such as a tissue paper,
and reseal.
4.If there's air still in the bag, fermentation or the release of natural
gases from inside the foods may have occurred, when this
happens ,food may have begun to spoil and should be discarded.
THE BAG MELTS:
If the bag melts, rubber lip may have become too hot, always wait at
least 5 minutes for appliance to cool down before you vacuum
package another item.
TROUBLESHOOTING
Nothing happens when you try to vacuum package:
1.Check if the power cord is tightly plugged into electrical outlet.
2.Check if the power cord is damaged.
3.Check if electrical outlet is working by plugging in another
appliance.
4.Make sure the latches is in the locked position.
5.Make sure bag is placed correctly inside Vacuum Chamber.
6.Allow the appliance to cool for 40 seconds before using it again
Note:To prevent overheating of the appliance, allow the
appliance to cool for 40 seconds before using it again, and
keep the cover open
AIR IS STILL IN THE BAG AFTER
1.Make sure the opening of the bag is placed entirely inside
Vacuum Chamber.
2.AIR IS STILL IN THE BAG AFTER VACUUM:
Examine the bag if it leaks. Seal bag with air, then immerse
it in water and apply pressure ,Bubbles indicate a leak, use
a new bag if bubbles appear.
3. If you use a Bag with customized size, check the seal
of bag. A wrinkle in the bag along the seal may cause leakage
and allow air to re-enter,just cut bag and reseal.
4.Do not attempt to make your own side seams for a
Bag, the bags are manufactured with special side seams ,
which are sealed all the way to the outer edge. Making your
own side seams may cause leakage and allow air to re-enter.
11 12
vacuum
vacuum