Owner's Manual

Getting Started 1-11
2. Tap Settings  Storage  Unmount SD card.
3. Flip open the microSD card cover. Press the edge of the card to release it
and then pull the card out of the slot.
Using the Tether
A tether is provided for attaching the stylus to your device.
1. Insert one of the tether’s loop ends through the hole of the stylus (as
indicated by
 below). Then, insert the other end through the first loop
(as indicated by
 below) and pull it tight.
2. Insert the other loop end to the right-side holder on the device (as
indicated by  below). Then, insert the stylus end through the loop (as
indicated by
 below) and pull it tight.