Owner's Manual

More Applications 8-9
E-Compass Settings
Tap in the navigation bar and tap E-Compass Setting for relevant
settings.
Items Descriptions
Rotation
Type
Set to Needle Compass for a pivoting needle on a fixed dial or
Wheel Compass for a fixed needle on a rotating dial.
Accuracy Check Calibration to allow the application to request for
calibration when needed.
Tap OK for the changes to take effect. Tap Reset to restore default settings.
Satellite Position
The Satellite Position page shows the positions of the overhead satellites
and their signal strength. It also indicates the on/off status of the SBAS and
logging functions.
SBAS (satellite-based augmentation system) provides additional accuracy
and reliability for the GPS devices. Ground stations are necessary to achieve
the purpose. The SBAS feature works where such stations exist. You can
enable the SBAS feature. (See “Getac Peripheral Settings” in Chapter 9.)