Owner's Manual

Getac Applications 6-9
Settings
Touch and touch Setting.
Items Descriptions
Location Service Check GPS satellites to turn on GPS receiver.
Satellites Log See the next subsection for information.
Rotation Type Set to Needle Compass for a pivoting needle on a fixed
dial or Wheel Compass for a fixed needle on a rotating
dial.
Display Check Calibration to display the Accuracy reading on the
Electronic Compass screen.
Check Balance to display the Pitch/Roll reading on the
Electronic Compass screen.
Touch OK for the changes to take effect.
GPS Logging
You can record a GPS log file for the use of other applications. The default
output format is NMEA. You can set the format to binary mode. (See “Getac
Peripheral Settings” in Chapter 7.)
1. Touch
and touch Setting.
2. Touch Start to write Log in /storage/sdcard0/GpsLog.
3. In the selection menu that pops up, touch .. to accept the default folder
for storing the file.
If you want to specify a different folder, select it in the menu.
4. Touch OK The recording will continue until you stop it.
5. To stop, touch
and touch Setting. Touch Stop to write Log in ….
6. Touch OK