Owner's Manual

Using BIOS Setup and System Recovery 5-13
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
Information
Main
Advanced
Security
TPM State
Boot
Exit
Boot priority order:
1: SATA ODD:
2: SATA HDD1:LITEONIT LAT-128M3S
3: USB HDD:
4: USB FDD:
5: PCI LAN: IBA GE Slot 00C8 v1365
6: USB ODD:
7: Other HDD:
8: ESATA HDD:
Item Specific Help
Keys used to view or
configure devices:

and

arrows Select a
device. ’+’ and ’-’
moves the device up or
down. ’Shift + 1’
enables or disables a
device. ’Del’ deletes
an unprotected device.
F1 Help ↑↓ Select Item +/- Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit
The bootable devices will be automatically detected during POST and shown
here, allowing you to set the sequence that the BIOS uses to look for a device
from which to load the OS.
Below is a brief description of keyboard usage:
Key Function
↑ , ↓
Selects (highlight) a boot device.
+, – Changes the boot sequence.
1 to 4 Loads the default boot sequence.
f or r Specifies if the boot device is fixed (f) or removable (r).
X Moves the highlighted boot device from the “Boot priority order”
list to the “Excluded from boot order” list, and vice versa.