Owner's Manual

Using BIOS Setup and System Recovery 5-7
USB 2.0 Mode set to Compatibility if a USB 2.0 device cannot work correctly
with the USB 3.0 port of your computer;
otherwise, set to Default .
Smart Card Power Management enables or disables power management for
the smart card module. When enabled, power to the module will be cut off
after the smart card slot has been empty for one minute.
AMT Configuration configures Active Management Technology parameters.
Press Enter to access the submenu as shown below.
Advanced
AMT Configuration Item Specific Help
Intel AMT
Intel AMT Setup Prompt
[Disabled]
[Disabled]
Enable/Disable Intel
(R) Active Management
Technology BIOS
Extension.
Note: iAMT H/W is
always enabled.
This option just
controls the BIOS
extension execution.
If enabled this
requires additional
firmware in the SPI
device
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and Exit
Intel AMT enables or disables Intel® Active Management Technology
BIOS extension execution. AMT allows the system administrator to access
an AMT featured computer remotely.
Intel AMT Setup Prompt determines whether the prompt for entering
Intel AMT Setup appears or not during POST. If disabled, users cannot
enter Intel AMT Setup.
Enabled