Owner's Manual

8-8
Troubleshooting
You cannot eject a disc.
The disc is not properly seated in the drive. Manually release the disc by
inserting a small rod, such as a straightened paperclip, into the drive’s
manual eject hole and pushing firmly to release the tray.
PC Card Problems
The PC card does not work.
z Make sure that the PC card is correctly seated.
z If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The PC card stops communicating properly.
z The application may have been reset when the computer is turned off or
in Sleep mode. Exit and restart the application.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.
z If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
z Make sure that the Sleep or Hibernation time-out is enabled.