User's Manual

1-10 Getting Started
Removing an SD card
You can safely remove the SD card from your device any time the device is shut
down. If you need to remove the card while the device is on, unmount the card
first to prevent corrupting or damaging the card.
To unmount:
1. Go to the Home screen and press the menu key on your device.
2. Tap Settings  SD card & phone storage  Unmount SD card.
3. Open the protection cover. Press the edge of the card to release it and then
pull the card out of the slot.
Using the Tether
A tether is provided for attaching the stylus to your device.
1. Insert one of the tether’s loop ends through the hole of the stylus. Then, insert
the other end through the first loop and pull it tight.
2. Insert the other loop end to the right-side or left-side holder on the device.
Then, insert the stylus end through the loop and pull it tight.