User's Manual
Table Of Contents
- Table of Contents
- Getting Started
- Operating Your Computer
- Managing Power
- Expanding Your Computer
- Using BIOS Setup
- Using Getac Software
- Caring for the Computer
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Appendix A
- Specifications
- Appendix B
- Regulatory Information
Expanding Your Computer 4-11
4. Remove the plastic bar by unfastening two screws.
5. To install the RAM module, match the module's notched part with the
socket's projected part and firmly insert the module into the socket at a
20-degree angle (
).
Then push down until the retaining clips lock the
module into position (
).
CAUTION: If the RAM module is difficult to insert or difficult to push down,
do not force it. Check once more to ensure that the module is positioned
correctly.
6. Replace the plastic bar and secure with two screws.
7. Close the compartment cover and secure with 8 screws.
8. Replace the battery pack.