User's Manual
Table Of Contents
- Table of Contents
- Getting Started
- Operating Your Computer
- Managing Power
- Expanding Your Computer
- Using BIOS Setup
- Using Getac Software
- Caring for the Computer
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Appendix A
- Specifications
- Appendix B
- Regulatory Information
8-12
Troubleshooting
System Recovery (a Tool for Windows 7
Models)
Use System Recovery when:
The Windows 7 operating system does not start at all.
You want to restore the system to the factory state.
WARNING:
Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive
will be lost.
Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the computer. During system startup when the following screen
appears, press Ctrl + Alt + F2 keys for four second.
4. In the screen that appears, select Recovery to start the recovery process.