User's Manual

Operating command refers to the below:
1.1 Q command：
Read EPC data from single TAG. Check the box【EPC(Q)】. It can read TAG EPC
data.
If it need continue to read single TAG. First check the box【Cont.】and check
the box【EPC(Q)】again.
Check the box【STOP】. It stops to read the TAG EPC.
1.2 U command
Read many EPC data from multi-TAG. First check the box【Multi】 and check
the box【EPC(U)】
If it need continue to read Multi-TG. First check the box【Cont.】and【Multi】,
check the box【EPC(U)】.