User's Manual

76
 Set HDD 0 User Password sets the password for locking the Primary Master hard
disk drive. After setting a password, the hard disk drive can only be unlocked
by the password no matter where it is installed.
 TPM Setup Menu sets various TPM parameters.
TPM Support enables or disables TPM support. TPM (Trusted Platform Module)
is a component on your computer’s mainboard that is specifically designed to
enhance platform security by providing a protected space for key operations and
other security critical tasks.
Change TPM State allows you to select between No Change and Clear.
 Intel Trusted Execution Technology enables utilization of additional hardware
capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the operating
system.
Press the arrow key to select a device on the boot order list and then press +/–
key to change the order of the selected device.
The [X] sign after a device name means the device is included in the search.
To exclude a device from the search, move to the [X] sign of the device and press
Enter.
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your
settings, you must save and exit so that the changes can take effect.
 Exit Saving Changes saves the changes you have made and exits BIOS Setup
Utility.
 Exit Discarding Changes exits BIOS Setup Utility without saving the changes you
have made.
 Load Setup Defaults loads the factory default values for all the items.