User's Manual

67
When and How to Use
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS Setup
Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system performance.
To run BIOS Setup Utility:
1. For Windows 10 models: Click  Settings  Update & security  Recovery.
Under Advanced startup, click Restart now. In the boot options menu, click
Troubleshoot  Advanced options  UEFI Firmware Settings. Click Restart. In the
next menu that appears, use the arrow key to select Setup Utility and press
Enter.
For Windows 7 models: Press the F2 key when the prompt appears on the screen
during system startup.
2. The BIOS Setup Utility main screen appears.
In general, you can use the arrow keys to move around and + / – keys to
change the setup values. Keyboard information can be found at the bottom of
the screen.
NOTE:
 The actual setting items on your model may differ from those
described in this chapter.
 The availability of some setting items depends on the Windows
version your computer is running.