User's Manual

Inserting and Removing a Disc

CAUTION (for models having the touchscreen feature): If the

stylus tether is attached to the computer, be careful the tether

does not get in the way when you open or close the DVD tray.

Follow this procedure to insert or remove a disc:

1. Turn on the computer.

2. Press the eject button and the DVD tray will slide out partially. Gently pull on

it until it is fully extended.

3. To insert a disc, place down the disc in the tray with its label facing up. Slightly

press the center of the disc until it clicks into place.

To remove a disc, hold the disc by its outer edge and lift it up from the tray.

4. Gently push the tray back into the drive.

Eject button