User's Manual

Using the Tether (Optional)

You can purchase a stylus and tether for your computer model. Use the tether to

attach the stylus to the computer.

1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated



below). Then, insert the other end through the first loop (as indicated



below) and pull it tight.

2. Insert the other loop end to the hook on the computer (as indicated by



below). Then, insert the stylus end through the loop (as indicated by



below)

and pull it tight.

3. When not in use, store the stylus in the stylus slot.

CAUTION: Be careful the tether does not get in the way when you

open or close the DVD tray (if your model has a DVD drive) and

when you connect the computer to the office or vehicle dock.