User's Manual

Using the WWAN Feature (Optional)

A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular

network technologies to transfer data. The WWAN module of your Tablet PC supports

3G and 4G LTE.

NOTE:

 Your model only supports data transmission. Voice

transmission is not supported.

 For instructions on installing the micro-SIM card, see

“Installing the Micro-SIM Card (Optional) and Battery Pack”

in Chapter 1.

Turning On/Off the WWAN Radio

To turn on the WWAN radio:

1. Make sure that the Airplane mode is switched off. You can control the Airplane

mode using one of the below methods.

 Use the Airplane Mode button in the OSD Control Panel.

 For Windows 10: Tap  Settings  Network & Internet  Airplane

mode. Slide the Airplane mode switch to the Off position.

2. If you have previously turned off the WWAN radio, use one of the below methods

to turn it on.

 For Windows 10: Open the Charms Bar of Windows. Tap Settings  

Network & Internet  Mobile Broadband. Slide the Mobile Broadband switch

to the On position.

 For Windows 7: Use the WWAN utility software or Getac Quick Bar. To open

Getac Quick Bar, tap and hold the Getac Utility icon on Windows taskbar

and select Quick Bar. Tap the WWAN button in the Quick Bar (an X over

the button means the radio is currently off).