User's Manual

HANVON PENTECH CO., LTD
The information contained herein is the exclusive property of Hanvon Pentech Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Hanvon Pentech
Co., Ltd. Page 11 of 15
8. Idle Mode*
If the board does not find the pen in 5 seconds, the board enters idle mode
(Max. current < 20mA), Support selective suspend mode, followed WHQL 8.0/8.1
Note: The power consumption in Idle mode and performance need to be
defined after the joint debugging.
9. Block Diagram
8 Pin Connector
Sensor board
Control
Board