User's Manual

58
SBAS Settings
SBAS (WAAS, MSAS, ENGOS) provides additional accuracy and reliability
for the GPS devices. Ground stations are necessary to achieve the purpose.
The SBAS feature works where such stations exist. To enable the feature, tap
 Settings  System  GPS  Advanced. Tap the checkbox to enable or disable
the SBAS function. A check () indicates enabled.
Tap ok when finished. If you change the setting while a GPS program (such as
TacLink) is running, the change takes effect only after you exit the GPS program
and then start it again.
Tap the checkbox to
enable or disable the
function. A check ()
indicates enabled.