User's Manual

NOTE: Follow these guidelines when using the compass.

 Keep the device away from objects that generate magnetic fields, such as cars, large

belt buckles, computers, cell phones, etc.

 If you must use the compass inside a car, the device should be at least 20 cm (7.87

inches) away from metal objects such as car doors, dashboard, air vents, etc.

 Avoid playing the MP3 music with the internal speaker or connecting the AC adapter.

This will cause the magnetic interference to the compass.

 Regularly set the reference altitude for an accurate output. (See the next section.)

Compass Settings

The value of altitude is adjusted according to the change in the ambient pressure.

It is important that you regularly set the reference altitude because the compass

needs an appropriate starting point (altitude versus ambient pressure) for future

adjustments.

To configure the compass, tap Setting  Setting. When finished, tap OK to save

the changes and go back to the Compass screen.

Setting Items

Descriptions

Altimeter

Set the reference altitude for the compass. You can either set a

specific height (zero by default) or use GPS positioning as the

reference (GPS positioning will be initiated after you tap OK).

Rotation Type

Set to Needle for a pivoting needle on a fixed dial or Wheel for a

fixed needle on a rotating dial.