User's Manual

Getting Started 1-11
2. Your device displays the USB Mode Switch screen
each time the USB cable is connected. The default
setting is ActiveSync. Tap OK to accept.
3. ActiveSync or WMDC will start on your computer.
See the program’s online help for instructions on
setting up synchronization.
NOTE:
 In case your computer does not respond after the
cable connection for ActiveSync mode, tap
 Settings  Connections  USB to PC, and then
clear Enable advanced network functionality. This
should resolve the problem.
 If the cable connection is for a different purpose such as using the device as a
microSD card reader or an external modem for your computer, tap one of the
other choices in the USB Mode Switch screen.
Using Options
Using a MicroSD Card
Your device has a microSD card slot where you can insert a microSD card for
removable extra storage. To insert a microSD card:
1. Remove the battery. (Refer to ‚Installing the SIM Card and Battery‛ earlier
in this chapter.)
2. With the microSD card’s connector facing down and the arrow pointing to the
slot, insert the card all the way into the slot.