User's Manual

1-10
Getting Started
Ref Component Description See Also

Light Sensor
Senses the ambient light for automatic adjustments
of the display backlight.

Indicators
Power
Lights blue when the power is on.
Blinks blue when the system is in Sleep mode.
Battery
Charge
Lights green when the battery is fully charged. P. 3-4
Lights amber when the battery is being charged.
Blinks red (once per second) when the battery’s
capacity is below 10%.
P. 3-6
Blinks red rapidly (once per 0.5 second) when
there is a thermal protection problem.
A
sk for repair
service in case this happens.
Blinks amber when the battery charging is in an
abnormal state. Replace the battery in case this
happens.
RF (Radio
Frequency)
Lights blue when the RF radio of any RF feature
(WLAN/BT/WWAN) is on.

Power Button
Turns the power on or off. (The default “off” state
is “Sleep mode.”)
P. 1-7

Extra Button
Starts the Getac Camera program and serves as
the shutter release button.
– or –
Serves as the trigger button for the barcode reader
if your model has the barcode reader module.
P. 6-5
– or –
P. 6-8
When Function Lock is on:
Enables or disables the touchscreen feature.
Provides a keyboard key function for specific P. A-2