User's Manual

4
battery pack is not within the allowed
temperature range.
• It is recommended that you do not charge the
battery pack more than once a day.
• It is recommended that you charge the
battery pack with the Tablet PC’s power off.
• To maintain the battery pack’s operating
efficiency when the Tablet PC is not in use,
store it in a cool dark place and with 30% ~
40% charge remaining.
• The Tablet PC’s input voltage and sur-
rounding temperature will directly affect the
battery pack’s charge and discharge time:
– charging time will be prolonged when
the Tablet PC is turned on.
To shorten the charging time, it is recom-
mended that you place the Tablet PC in
Sleep or hibernation mode.
– a low temperature will prolong the
charging time as well as hasten the dis-
charge time.
• When using battery power in an extremely low
temperature environment, you may experience
shortened operating time and incorrect battery
level reading. This phe-
nomenon comes from the chemical char-
acteristics of batteries. The appropriate
operating temperature for the battery is
-10 °C ~ 50 °C (14 °F ~ 122 °F).
Touchscreen Guidelines
• Use the finger or the included stylus on the
display. Using a sharp or metallic object other
than your finger or stylus may cause
scratches and damage the display, thereby
causing errors.
• Use a soft cloth to remove dirt on the dis-
play. The touchscreen surface has a special
protective coating that prevents dirt from
sticking to it. Not using a soft cloth may cause
damage to the special protective coating on
the touchscreen surface.
• Turn off the Tablet PC power when clean-
ing the display. Cleaning the display with the
power on may cause improper opera-
tion.
• Do not use excessive force on the display.
Avoid placing objects on top of the display as
this may cause the glass to break thereby
damaging the display.
• Using the touchscreen during low tempe-
rature (less than 5
o
C / 41 °F) may cause a
slower response time. This is normal. A
normal response time may be restored upon
returning to room temperature.
• When there is a noticeable discrepancy in the
placement of the stylus on the screen and the
indicated position of the onscreen pointer,
use the calibration utility to reca-
librate the touchscreen display.
System Recovery
Tap  Settings  Update & security. You
have several options.
• System Restore
• Recover from a drive
• Reset this PC
See Microsoft website for more information.
More Information
For complete information of the product, refer to
the User Manual (in PDF format)
on your Window’s desktop or Driver Disc.
You can download the latest manual and drivers
by accessing the Getac web link at
http://www.getac.com  Support.
FCC Regulations:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user‘s authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
561xxxxxxxxxR00