User's Manual

5-10 Using BIOS Setup and System Recovery
System Recovery
Use System Recovery when:
 The Windows operating system does not start at all.
 You want to restore the system to the factory state.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to the
system’s factory default settings. All data on the hard disk drive will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To run System Recovery:
1. It is recommended that you connect the AC adapter to ensure power
supply throughout the process.
2. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Ent and select HDI Recovery when a
small window appears on the screen.