User's Manual

5-2 Using BIOS Setup and System Recovery
BIOS Setup
When and How to Use
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system
performance.
To run BIOS Setup utility, press the Ent key when the prompt appears on the
screen during system startup. The prompt shows up on the screen for only
a few seconds. You must press the Ent key quickly. A small window
appears, press Ent again to perform the first option (Launch System Setup).
The BIOS Setup Utility main screen appears as shown next.
Information
Main
Advanced
Security
Boot
Exit
Model NO:
Serial NO:
Processor Info:
Installed System Memory:
SATA Port 1
BIOS Revision:
EC Revision:
LAN MAC Address:
Operating Time:
E100-A
0123456789
Intel(R) Atom(TM) CPU N450 @1.66GHz
2048MB
[INTEL SSDSA1M080G2GN] 80GB
R0.51.070520F
R0.51b
00-E0-4C-68-00-0C
57 Hours
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select  Sub-Menu F10 Save and Exit