User's Manual

8-6 Troubleshooting
The PC card stops communicating properly.
 The application may have been reset when the Tablet PC is turned
off or in Sleep mode. Exit and restart the application.
Power Management Problems
The Tablet PC does not enter Sleep or Hibernation mode automatically.
 If you have a connection to another computer, the Tablet PC does
not enter Sleep or Hibernation mode if the connection is actively in
use.
 Make sure that the Sleep or Hibernation time-out is enabled.
The Tablet PC does not enter Sleep or Hibernation mode immediately.
 If the Tablet PC is performing an operation, it normally waits for the
operation to finish.
The Tablet PC does not resume from Sleep or Hibernation mode.
 The Tablet PC automatically enters Sleep or Hibernation mode when
the battery pack is empty. Do any one of the following:
 Connect the AC adapter to the Tablet PC.
 Replace the empty battery pack with a fully charged one.
Software Problems
An application program does not work correctly.
 Make sure that the software is correctly installed.
 If an error message appears on the screen, consult the software
program’s documentation for further information.
 If you are sure the operation has stop, reset the Tablet PC. (See
“Resetting the Tablet PC” later in this chapter.)