User's Manual

5-14
Using BIOS Setup and System Recovery
System Recovery
Use System Recovery when:
z The Windows operating system does not start at all.
z You want to restore the system to the factory state.
WARNING:
z Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive
will be lost.
z Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To run System Recovery:
1. Connect the AC adapter.
2. Connect a USB mouse or keyboard.
3. Turn on the Tablet PC. During system startup when the Getac logo
screen appears, double-tap the screen. In the menu that appears, select
App Menu and then HDI Recovery.
Or, if a keyboard is connected, you can press Ctrl + Alt + F2 keys for four
seconds instead of tapping the screen.