E110 USER’S MANUAL Rugged Mobile Computing Solutions
May 2012 TRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents Chapter 1 Getting Started .............................................................1-1 Getting the Tablet PC Running .............................................. 1-2 Unpacking ........................................................................... 1-2 Installing the Battery Pack and Connecting to AC Power1-3 Using the Tether ................................................................. 1-6 Using the Hand Strap .........................................................
Connecting to WWAN 3G Network ................................ 2-15 ii Chapter 3 Managing Power ...........................................................3-1 AC Adapter .............................................................................. 3-2 Battery Pack............................................................................. 3-3 Charging the Battery Pack ................................................. 3-3 Checking the Battery Level ................................................
Chapter 6 Using Getac Software ...................................................6-1 Using the OSD Control Panel ................................................. 6-2 Quick Button Setup ............................................................ 6-6 Using G-Manager .................................................................... 6-8 Starting G-Manager............................................................ 6-8 System Tab .......................................................................
When Traveling ....................................................................... 7-8 Chapter 8 Troubleshooting ............................................................8-1 Preliminary Checklist............................................................... 8-2 Solving Common Problems .................................................... 8-3 Battery Problems ................................................................ 8-3 Bluetooth Wireless Transmission Problems ......................
Chapter 1 Getting Started Congratulations on purchasing this rugged Tablet PC. This chapter first tells you step by step how to get the Tablet PC up and running. Then, you will find a section briefly introducing the external components of the Tablet PC.
Getting the Tablet PC Running Unpacking After unpacking the shipping carton, you should find these standard items: z Tablet PC z Accessories: AC adapter AC power cord Hand strap Screen protector film (already attached to the screen) Stylus and tether Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the Tablet PC in the future.
Installing the Battery Pack and Connecting to AC Power The Tablet PC operates either on the external AC power or internal battery power. It is suggested that you use AC power when starting up the Tablet PC for the very first time. CAUTION: Use only the AC adapter included with your Tablet PC. Using other AC adapters may damage the Tablet PC. 1. Make sure that the Tablet PC is turned off. 2. Place the Tablet PC upside down. 3.
4. Fit the battery pack into place (n). Tightening the two screws (o) is optional. The lack of the screws will not affect the rugged and waterproof feature of the Tablet PC. 5. Replace the battery cover and turn the latch clockwise to the lock position.
6. Plug the DC cord of the AC adapter to the power connector of the Tablet PC (n). Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (o). 7. Power is being supplied from the electrical outlet to the AC adapter and onto your Tablet PC. Now, you are ready to turn on the Tablet PC. CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC. A reverse procedure may damage the AC adapter or the Tablet PC.
Using the Tether A tether is provided for attaching the stylus to your Tablet PC. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by n below). Then, insert the other end through the first loop (as indicated by o below) and pull it tight. 2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by n below). Then, insert the stylus end through the loop (as indicated by o below) and pull it tight.
Using the Hand Strap Following the orientation as shown below, enclose your Tablet PC with the hand strap and engage all the hook-and-loop fasteners. The hand strap allows you to firmly hold the Tablet PC by inserting your hand through the elastic band at the back. The hand strap is designed with individual fasteners for easy access to different components (such as the battery). It also provides loops for adding a shoulder strap (purchased separately).
Turning On and Off the Tablet PC Turning On Press the power button ( Windows should start. ). The operating system such as Microsoft Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this... Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep Press the power button (default function) or use the Windows Start menu to put the Tablet PC in Sleep mode.
Taking a Look at the Tablet PC NOTE: Depending on the model you purchased, the appearance of your Tablet PC may not be exactly the same as those shown in this manual. CAUTION: When not using a connector, make sure that the connector cover is completely closed to ensure the waterproof integrity of the Tablet PC. Front Components Ref Component Description See Also n Touchscreen Displays and receives information for the Tablet PC. o p Microphone Receives sound and voice to record voice.
Ref Component Description See Also NOTE: Do not cover the sensor when in use. q Power Button Turns on or off the system. (The “off” state means “Sleep mode” by default.) P. 1-8 r Menu Button Opens or closes the OSD Control Panel. P. 6-2 Provides a keyboard key function for specific occasions. (Information is provided in Appendix A.) P. A-3 s t P1 Button Starts Microsoft Internet Explorer by default. This button matches the first quick button in the OSD Control Panel.
Ref Component Description See Also Blinks amber when the battery charging is in an abnormal state. Replace the battery in case this happens. u RF (Radio Frequency) Lights green (for models without WWAN 3G) or amber (for models with WWAN 3G) when RF radio is on. Hard Disk Drive Lights green when hard disk drive is being accessed. Speaker Sends out sound and voice from your Tablet PC. P.
Rear Components Ref Component Description See Also n Camera Lens (optional) Allows you to use the camera function. P.6-20 o Battery Pack Inside is the battery pack that supplies power to your Tablet PC when external power is not connected. P. 3-3 Contains the SIM card slot (optional). p 1-12 Backup Battery Getting Started Provides temporary backup power when the main battery pack is removed. P. 2-13 P.
Right-Side Components Ref Component Description See Also n Kensington Lock Locks the Tablet PC to a stationary object for security. P. 7-2 o Stylus Serves as the input device by tapping on the touchscreen to make selections and enter information. P. 2-2 p Tether Hole Stylus tethered to this hole. P. 1-6 Left-Side Components Ref Component Description See Also n o RJ-45 Connector Connects the LAN cable. P.
Top Components Ref Component Description See Also n Smart Card Reader Accepts a Smart Card for additional security feature. P. 4-2 o PC Card Slot Accepts a PC card for additional functions. P. 4-3 Or can be one of the below optional components (not shown in the figure). Smart Card Accepts a Smart Card for additional Reader (optional) security feature.
Bottom Components Ref Component Description See Also n WWAN Pass-through Connector (optional) o GPS Pass-through Connects to the external antenna for Connector GPS signal reception. (optional) NOTE: Must be connected via a docking station. p Docking Connector Connects to the Docking Station (available as an option). P. 4-8 q Power Connector Connects the AC adapter. P. 1-5 Connects to the external antenna for WWAN (wireless wide area network) connectivity.
Chapter 2 Operating Your Tablet PC This chapter provides information about the use of the Tablet PC. If you are new to Tablet PCs, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC. CAUTION: z Do not expose your skin to the Tablet PC when operating it in a very hot or cold environment. z The Tablet PC can get uncomfortably warm when you use it in high temperatures.
Using the Touchscreen CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included stylus or your finger NOTE: z A screen protector film has been attached to the screen before shipment. The film is a consumable, which will be worn out by possible scratches. You can purchase a new one when replacement is required. z Instead of a hard tip, your stylus has a soft tip so that it does not scratch the screen protector film.
Equivalent Mouse Function Term/Action Tap: Touch the screen once. Click/Point Double-tap: Touch the screen twice rapidly. Double-click Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag Using Multi-touch Gestures If your model comes with multi-touch-capable screen and Windows 7, you can interact with your Tablet PC by placing two fingers on the screen.
Gestures ( Actions = finger down; = finger up) Rotate or Move two fingers in opposing directions. -orUse one finger to pivot around another. Press and Tap Descriptions Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counterclockwise). The gesture works in applications that support the specific gesture. Use press and tap to access the shortcut menu. Press on target and tap using a second finger.
Gestures ( Actions = finger down; = finger up) Flicks Make quick drag gestures in the desired direction. Descriptions Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.
Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: z Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard. z Writing Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.
Using the Network Features Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your Tablet PC to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the ) on the Tablet PC and the other LAN cable to the RJ-45 connector ( end to the network hub.
Technology Data Rates (Mbps) 802.11a 802.11b/g 6, 9, 12, 18, 24, 36, 802.11b: 1 and 2 48, and 54 Mbps in Mbps in DSSS OFDM mode mode; 5.5 and 11 Mbps in CCK mode 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps in OFDM mode. 802.11n 130 Mbps under the condition of 2 spatial streams, 64-QAM modulation type, 20 MHz-wide channel, and 5/6 coding rate.
Connecting to a Wireless Network 1. Make sure that the WLAN function is enabled (as described above). on the taskbar. (An orange light in 2. Click the Wireless Network icon indicates connections are available.) the icon 3. In the list of available wireless networks, select a network, and then click Connect. 4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase.
Using the Bluetooth Feature (Optional) The Bluetooth 4.0 technology allows short-range (about 50 meters) wireless communications between devices without requiring a cable connection. Data can be transmitted through walls, pockets and briefcases as long as two devices are within range. The status of the Bluetooth connection is indicated by the Bluetooth icon located in the taskbar. Status Icon Off (blue with red logo) On (blue with white logo).
3. The Bluetooth function is enabled by default, as indicated by the Bluetooth icon on the Windows taskbar. (In case you have previously disabled the function in the Bluetooth utility, be sure to enable it when using the function the next time.) Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range.
6. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth Utility, see the online help by clicking Help in the My Bluetooth Settings window.
Using the WWAN 3G Feature (Optional) 3G is the third generation of mobile phone standards and technology. Services include wide-area wireless voice telephony and broadband wireless data, all in a mobile environment. NOTE: Your model only supports data transmission. Voice transmission is not supported. Installing the SIM Card To use the 3G feature to connect to the Internet, you need to subscribe to 3G service and acquire a SIM card from the service provider. To install the SIM card, follow these steps: 1.
3. Remove the two screws if existing (n). Pull on the ribbon strip to lift the battery pack off the Tablet PC (o). 4. Locate the SIM card slot and push the SIM card into the slot. Make sure the beveled corner on the SIM card is facing towards the Tablet PC and that the golden contact area on the card is facing downwards. To remove the SIM card, just push in the SIM card to pop-out and remove the card. 5. Replace the battery pack.
6. Replace the battery cover and turn the latch clockwise to the lock position. Connecting to WWAN 3G Network 1. Press the Menu button on your Tablet PC to open the OSD Control Panel. 2. Click the RF button to switch the wireless radio on/off. The word ON or OFF on the button indicates the current status. 3. Pull out the WWAN 3G antenna.
4. On Windows desktop, double-click the AirCard Watcher shortcut. The screen as below appears. 5. If the radio is currently off, click Turn Radio On to turn on the radio. 6.
Chapter 3 Managing Power Your Tablet PC operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: z The AC adapter is designed for use with your Tablet PC only. Connecting the AC adapter to another device can damage the adapter. z The AC power cord supplied with your Tablet PC is for use in the country where you purchased your Tablet PC. If you plan to go overseas with the Tablet PC, consult your dealer for the appropriate power cord. z When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC.
Battery Pack The battery pack is the internal power source for the Tablet PC. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the Tablet PC. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 7.
NOTE: The battery level may automatically lessen due to the self-discharge process (0.21% per day), even when the battery pack is fully charged (100%). This happens no matter if the battery pack is installed in the Tablet PC. Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the Tablet PC.
Backup Battery Your Tablet PC comes with a backup battery to support hot swapping of the main battery pack. The backup battery can sustain power for up to 3 minutes, which should be long enough for you to replace the battery pack. Whenever you remove the main battery pack, the system instantly switches to the backup battery. During this period, the system operation is not interrupted but the brightness level will be fixed at a low level and cannot be adjusted.
Unlock position 2. Remove the two screws if existing (n). Pull on the ribbon strip to lift the battery pack off the Tablet PC (o). 3. Fit another battery pack into place. 4. Replace the battery cover and turn the latch clockwise to the lock position.
Battery Low Signals and Actions When the battery is low, Windows gives warning messages and the Battery Charge Indicator ( ) blinks red to alert you. NOTE: You can set up your threshold and signals of Battery Low under Windows. Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the Tablet PC. Always respond to Battery Low by placing your Tablet PC on the Sleep or Hibernation mode, turning off the Tablet PC, or connecting the AC adapter.
Power Management Your Tablet PC supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different Tablet PC components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What... When...
Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The Tablet PC stores the state of your Tablet PC to a file on the hard disk and then shuts down.
Power-Saving Tips Aside from enabling your Tablet PC’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. z Do not disable Power Management. z Decrease the LCD brightness to the lowest comfortable level. z Shorten the length of time before Windows turn off the display. z Many USB devices use power just by being connected.
Chapter 4 Expanding Your Tablet PC You can expand the capabilities of your Tablet PC by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Using Smart Cards Depending on your model, your Tablet PC has one or two smart card readers. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card reader. Open the cover. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot.
Using PC Cards The PC card slot supports type II card and CardBus specifications. NOTE: Avoid removing or inserting PC cards during Sleep mode. To insert a PC card: 1. Locate the PC card slot. Open the cover. 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject button 3. When a new card is seated, the Tablet PC will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process.
Using SD Cards (Optional) NOTE: You can use only storage cards. Your Card Reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Depending on your model, your Tablet PC may have an SD card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The reader supports SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards. To insert an SD card: 1. Locate the SD card reader.
Connecting a USB Device Your Tablet PC has two USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices. To connect a USB device, simply plug the device cable to one of the USB ). (Open the cover to access the port.
Connecting a Serial Device Your Tablet PC has a serial port for connecting a serial device such as a serial mouse or serial communication device. Follow this procedure to connect a serial device: 1. Make sure the Tablet PC is not turned on. 2. Plug the device cable to the serial port. (Open the cover to access the port.) 3. Turn on the Tablet PC.
Connecting an Audio Device For higher audio quality, you can send sound through external audio devices such as speakers, headphones, or earphone set using the audio combo connector. (Open the cover to access the port.) The combo connector is the “4-pole TRRS 3.5mm” type (Apple iPhone Recessed) so you can connect a compatible headset microphone.
Using the Docking Station Docking Station is available as an option. The device eliminates the hassles of having you connect and disconnect the various cables when carrying your Tablet PC around and allows a variety of peripherals to be connected. 1. Locate the docking connector. 2. Connect the Docking Station to the docking connector. For more detailed information, refer to the operating Instructions of the Docking Station.
Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the Tablet PC. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the Tablet PC hardware can understand. The BIOS settings are needed by your Tablet PC to identify the types of installed devices and establish special features.
BIOS Setup When and How to Use You need to run BIOS Setup Utility when: z You see an error message on the screen requesting you to run BIOS Setup Utility. z You want to restore the factory default BIOS settings. z You want to modify some specific settings according to the hardware. z You want to modify some specific settings to optimize the system performance. NOTE: The BIOS Setup Utility supports touchscreen operation. However, you are advised to connect a USB keyboard before running BIOS Setup.
Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. Information Main Advanced Security Boot Exit Model NO: Serial NO: E110 0123456789 Processor Info: Installed System Memory: Intel(R) Atom(TM) CPU N2800 @1.86GHz 4096MB SATA HDD: LITEONIT LMT-64M3M – 64.0 GB BIOS Revision: EC Revision: LAN MAC Address: R0.52.070520 R0.
Main Menu The Main menu contains the various system settings. Information Main Advanced Security System Date: System Time: 04 [05/09/2012] [11:33:08] Legacy USB Support: [Enabled] F1 Help Esc Exit ɥɧ Select Item ɤɦ Select Menu Boot Exit Item Specific Help View or set system date. +/Change Values Enter Select X Sub-Menu F9 Setup Defaults F10 Save and Exit System Date sets the system date. System Time sets the system time.
Advanced Menu The Advanced menu contains the advanced settings.
Advanced Intel (R) Rapid Start Technology iRST Support: F1 Help Esc Exit Enable iRST. [Disabled] Disabled ɥɧ Select Item ɤɦ Select Menu Item Specific Help +/Change Values Enter Select X Sub-Menu F9 Setup Defaults F10 Save and Exit iRST Support enables of disables iRST, which gets your system up and running faster Wake Up Capability specifies events for waking up the system from S3/S4/S5 state. Press Enter to access the submenu as shown below.
RTC S4 Wakeup enables or disables the RTC (Real Time Clock) wakeup from S4 (Hibernation) feature when AC power is connected. Set this item to Enabled if you use Windows task scheduler to have the computer automatically perform tasks at specific times. LAN Wake Up From S3 or S4/S5 allows a LAN activity to wake up the system from S3 (Sleep) or S4 (Hibernation)/S5 (shutdown) state. USB Wake Up From S3 allow a USB device activity to wake up the system from S3 (Sleep) state.
Advanced Device Configuration Wireless LAN: WWAN: Bluetooth Media Card Reader: Smart Card Reader: HD Audio: F1 Help Esc Exit [ Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] ɥɧ Select Item ɤɦ Select Menu Item Specific Help Set WLAN device to enable/disable.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Boot Exit Item Specific Help Supervisor Password Is: User Password Is: Cleared Cleared Set Supervisor Password: [Enter] Enter Set User Password: [Enter] Authenticate User on Boot: [Disabled] Set HDD00 Password: HDD00 Password State: X Set or clear the Supervisor account’s password.
password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Authenticate User on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system.
Current TPM State shows the current TPM state. TPM Action allows you to select between No Change, Clear, Disabled and Deactivated, and Enabled and Activated. Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system.
Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes F1 Help Esc Exit ɥɧ Select Item ɤɦ Select Menu Equal to F10, save all changes of all menus, then exit setup configure driver. Finally resets the system automatically.
Operations during POST During POST when the Getac logo screen appears, you can double-tap the screen to access specific menus as described below. Menu Boot Menu App Menu Description Lists the bootable devices. Select the device you want to boot from. Setup Runs the BIOS Setup Utility as described in the previous “BIOS Setup” section. HDI Recovery Performs System Recovery as described in the next “System Recovery” section.
System Recovery Use System Recovery when: z The Windows operating system does not start at all. z You want to restore the system to the factory state. WARNING: Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost. z Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. z To run System Recovery: 1.
4. In the screen that appears, select Recovery to start the recovery process. 5. The progress bar shows the percentage completed. When it reaches 100%, the system turns off. 6. Turn on the Tablet PC. The Windows setup wizard starts. Follow the onscreen prompts to continue. 7. When the system restarts, the installer screen appears. The installer will perform system hardware detection and driver installation. 8. When completed, the system restarts and displays Windows desktop.
Chapter 6 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter describes how to use the programs.
Using the OSD Control Panel The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your Tablet PC with a simple tap of the screen. To open the OSD Control Panel, press the Menu button on your Tablet PC. The following screen appears. The following table shows the various functions on the OSD Control Panel.
Icon Function Opens the Help file explaining the OSD Control Panel. Opens the Quick Button Setup menu (refer to the next section for details). Closes the OSD Control Panel. Serves as the master ON/OFF control of the RF radio. The word on the button indicates the current status. When set to OFF, all wireless modules (WLAN/Bluetooth/ WWAN) cannot be used. When set to ON, individual settings of the module work.
Icon Function When set to MAX, the backlight is adjusted to the highest brightness level. When set to AUTO, the brightness will be automatically adjusted according to the current ambient light. The backlight will return to the default MANUAL setting whenever the system resumes from Sleep/Hibernation mode or the system is restarted. Rotates the orientation from default landscape to 90o portrait, 180o landscape, or 270o portrait. The status will persist through Sleep/Hibernation mode or system power off.
Icon Function Allows you to adjust the sound volume by dragging the knob along the bar. Switches the system sound output OFF (mute) and ON. Allows you to adjust the LCD brightness level by dragging the knob along the bar. System enters “black-out” mode by turning off the LCD display, LED indicators, touchscreen, and sound. Press the power button ( “black-out” mode.
Quick Button Setup By default, the five quick buttons on the OSD Control Panel have pre-assigned functions. You can re-define the buttons: ) on the OSD control panel 1. Click the Quick Button Setup button ( and the Quick Button Setup window appears. 2. At the bottom of the screen are the five quick buttons. Click the button you want to change. 3. Depending on the type of task to be associated with the button, click the Open button of the Executed Program or Open Folder type. 4. A dialog box appears.
or 5. You can change the image appearing on the button by clicking the Select Image button. After selecting the image file, the original image on the button will be replaced. 6. Click Set to complete the changes. NOTE: You can restore the quick buttons to the default settings by clicking Reset All.
Using G-Manager G-Manager is a unified user interface utility that allows you to manage and configure the following: z System z Battery z ECO (economic mode) z Light Sensor z Antenna z Ignition z Monitoring z GPS Status Starting G-Manager You can start up G-Manager by any of the following methods: z Click Start Æ All Programs Æ Getac Utility Æ G-Manager, or z Click and hold the icon located on the taskbar until a ring appears. From the small menu that pops up, click G-Manager.
System Tab The System tab provides system information. To view specific information, select the component from the list on the left side of the screen. The information of the selected component will be displayed on the right side of the screen.
Battery Tab The Battery tab allows you to check the battery status and configure the battery. The battery items shown in the screen depend on your computer model. You may see up to three battery items (Backup, Battery 1, and Battery 2). Click a battery item to view the information of the selected battery. Batteries not installed in your computer are grayed-out. Battery Information The upper portion of the screen displays the current status of the selected battery.
Charging Mode The lower left portion of the screen allows you to select the charging mode. z Normal Mode – The battery will be fully charged. When remaining charge reaches below 95%, then charging will start until it is fully charged. z Economy Mode – This mode helps prolong battery life by charging up to 80% of its total capacity only. It is highly recommended if you are using AC power most of the time.
4. Wait till the process is completed. Click Exit when finished. ECO Tab The ECO tab allows you to configure ECO modes (or called power profiles). To put the system into an ECO mode, use the ECO button (one of the buttons in the OSD Control Panel). (See “Using the OSD Control Panel” earlier in this chapter for information.
ECO Information The left portion of the screen lists the available power profiles (Quick, Power Saving, and Work). Each profile is a combination of power settings that results in different power consumptions. To change the settings of a profile, select (highlight) the profile name in the list. Profile Settings The right portion of the screen displays the settings of the current selected profile. You can set up the following items: z WWAN (3G), Bluetooth, and WLAN – can be on or off.
Light Sensor Tab The Light Sensor tab allows you configure how the light sensor works. Sensor Mode The left portion of the screen lists the sensor modes: z Normal – Light sensor sensitivity is set at normal environment lighting condition. z Bright – Light sensor sensitivity is set at bright environment lighting condition (e.g. outdoors). z Dark – Light sensor sensitivity is set at dark environment lighting condition (e.g. indoors, storage warehouse, etc.). Click to select a mode.
Environment Illuminance NOTE: Not all models support this function. To have the keypad backlight automatically turn on in poor lighting environment, click the checkbox Automatic Keyboard Backlit. Click Apply or OK to save the changes. Antenna Tab The Antenna tab allows you to set if your system will automatically use the external GPS or WWAN antenna when connected to the Docking Station. Select the checkbox(es) accordingly. Click Apply or OK to save the changes.
Ignition Tab The Ignition tab allows you to configure how your system works with the vehicle ignition. Ignition Control When your system is connected to the Vehicle Dock (available as an option), you can have your system derive power from the vehicle and have the on/off of the vehicle ignition turn on/off your system. To enable the feature, select the checkbox Ignition Power On. Click Apply or OK to save the changes.
Monitoring Tab The Monitoring tab allows you to configure the monitoring function of G-Manager. Items to Monitor The left portion of the screen lists the items. Click the checkbox before an item to include it as a monitored component. Click Apply or OK to save the changes. NOTE: Different models have different supported monitoring items; non-supported items cannot be selected (grayed out items).
z Monitoring Interval – sets the frequency of updates on the monitoring window (1/3/5/10/30 seconds or 1/5/30 minutes). Click Apply or OK to save the changes. Starting and Stopping the Monitoring To start monitoring, click START Monitor. The monitoring window similar to the one below appears displaying requested information at specified intervals. To stop monitoring, click the Close button at the upper right corner of the monitoring window or click Stop Monitor on the Monitoring tab page of G-Manager.
GPS Status Tab The GPS Status tab shows the GPS status for models having the GPS module. To start GPS positioning, click Start GPS. The screen displays: z Ongoing raw data strings in the Message Log section z Overhead satellite positions in the Satellite Map section z Signal strength of the satellites in the Signal Indicator section When GPS positioning is completed, the Data Summary section shows the GPS information of the current location. To stop GPS positioning, click Stop GPS.
Using Getac Camera (Optional) Getac Camera is a geo-tagging camera program, which allows you to stamp geographical information on photos as watermarks and embed such information into JPEG files as EXIF 2.2 metadata. NOTE: z Getac Camera works with Virtual-GPS (a separate application program). Make sure that Virtual-GPS is installed in your computer. z Before starting Getac Camera, close any other program that uses the camera; otherwise, Getac Camera can only provide limited functions.
No. Screen Elements Descriptions n Preview/Display Displays the live image in Camera mode and the Window selected image in View mode. o GPS Status p Window Control Buttons Indicates if the GPS positioning is completed ( or not ( ). ) Minimizes the program window. / Resizes/maximizes the program window. When resized, the smaller window size is fixed. You can move it but cannot change the size furthermore. Closes the program. q Status Display Indicates the use of a feature.
No. Screen Elements u Descriptions Command Buttons Switches to Camera mode. Switches to Camcorder mode. Switches to View mode. Switches to GPS view. Switches to the Settings screen. Provides copyright, licensing, and help information. Taking Pictures 1. Start the Getac Camera program. You will be in Camera mode. 2. You can use the buttons on the right and left side of the preview window for immediate controls. (See “Camera Control Buttons” for detailed information.
4. When ready, you can shoot the picture using either of the two methods: x Method 1: Tap the button. TIPS: If your computer model comes with multi-touch screen and Windows 7, You can conveniently tap the focus button using your left hand and tap the shutter button using your right hand at the same time. x Method 2: Drag the preview image and drop it into Thumbnail Tray. 5. The picture will appear in the middle of the Thumbnail Tray and be saved to the predefined storage location.
Camera Control Buttons Control Buttons Descriptions Flips the image horizontally. Flips the image vertically. / / 6-24 Turns on/off GPS lock. The icon in the button shows the current status. GPS lock allows you record the exact location of the object you are shooting instead of where you are using the computer to shoot the picture.
Shooting Videos 1. Start the Getac Camera program. You will be in Camera mode. Tap to switch to Camcorder mode. 2. You can use the buttons on the right and left side of the preview window for immediate controls. (See “Camcorder Control Buttons” for detailed information.) For overall settings, tap information.) . (See “Camera Settings” for detailed 3. Aim the camera lens at your subject. To start shooting the video, tap the button. 4. To stop, tap the same button again. 5.
Camcorder Control Buttons Control Buttons Descriptions Increases the recording sound volume. Disables/enables the microphone. Decreases the recording sound volume. / Turns on/off the display of elapsed recording time and current volume. Using View Mode Tap at the bottom of the screen to switch to View mode. While in Camera or Camcorder mode, you can also switch to View mode by either of the two methods: z Method 1: Double-tap the thumbnail in the Thumbnail Tray.
z Method 2: Drag the thumbnail and drop into the display window. Image Viewing Controls When you select an image to view, you can perform the following tasks. To Zoom in/out (up to four scales) Via Control Buttons Via Multi-touch Operations / Drag two fingers apart/ towards to zoom in/out.
To Via Control Buttons Via Multi-touch Operations When zoomed in, you can drag to view another portion of the image. Restore to the 100% scale Rotate to the right/left by 90q / Drag two fingers in a clockwise/counterclockwise circular motion. View image properties Adding Notes to an Image 1. Switch to View mode, select the image, and tap 2. In properties view, tap . 3. Type your notes in the entry field. 4. When completed, tap . The first three lines of the notes show on the screen.
Video Playback Controls When you select a video to playback, you can perform the following tasks.
Camera Settings To change camera settings, tap at the bottom of the screen. The Settings window appears showing the setting item previously accessed. Along the left of the window are all the setting items. You can drag this area up or down to scroll through the items. The middle of the window displays the current item and setting value. To the right is the adjustment bar where you can tap or drag to change the setting value. All changes (except for Camera Mode) remain effective until you change them again.
Items Name Descriptions Contrast Adjusts the contrast level. The range of levels depends on computer models. to restore to the default level. You can tap Hue Adjusts the hue level. The range of levels depends on computer models. to restore to the default level. You can tap Flicker Sets the frequency to match the local electrical system for flicker free shooting under electric light. Choices are: 60Hz (default) and 50Hz. LED Light Turns On (default) or Off the LED light.
Items Name Descriptions Shutter Sound Turns On (default) or Off the sound played upon photo shooting. Power Saving Sets if power saving works for the program. System (default) The Camera program enters power saving mode according to the settings of Windows’ Power Options. Never The Camera program will not enter power saving mode while the program window is open. But when the program window is minimized, the System setting overrides. Camera Switch Not supported by your model.
Items Name Descriptions UTC Filename Prefix The time is based on Coordinated Universal Time. The default filename prefix is IMG. The complete filename is IMG_xxxxxx.jpg (where xxxxxx = sequential number). When the sequential number has reached 999999 and you are taking the next picture, a message will pop up to ask you to change the prefix. You can change the prefix by typing the characters (limited to A~Z, a~z, 0~9, - and _) in the entry field. Maximum number of characters allowed is 10.
Using Getac Smart Tag (Optional) NOTE: The Getac Smart Tag program is available for models with the RFID module only. Getac Smart Tag is a demo program that reads UID numbers from RFID tags. For enhanced applications and customization of the RFID reader/writer, contact your authorized Getac dealer. Location of internal FRID antenna Reading Tags NOTE: The procedure below is based on the default settings of Getac Smart Tag. 1.
2. By default, Getac Smart Tag scans three tag types, once for each type. To change settings, use the options menu. (See “Options Menu” later for information.) 3. Tap the floating button to start scanning. While scanning is in progress, the button’s color is orange Idle Scanning 4. The result window as below appears. The Card Type field shows which type of tags are being scanned now. If a tag of the matching type is found, the Card UID field shows its UID; otherwise the field is blank.
Options Menu Tap and hold the floating button to open the options menu. Menu Items Descriptions 14443-A / 14443-B / Check one of the three tag types for single type 15693 / Auto scanning. Check Auto to scan all three types. Send UID out Check this item for the UID data to be entered to where you have placed the insertion point (or called cursor) in a processing software. If unchecked (default setting), the result window appears to display the UID data.
Chapter 7 Caring for the Tablet PC Taking good care of your Tablet PC will ensure a trouble-free operation and reduce the risk of damage to your Tablet PC. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Protecting the Tablet PC To safeguard the integrity of your Tablet PC data as well as the Tablet PC itself, you can protect the Tablet PC in several ways as described in this section. Using the Cable Lock You can use a Kensington-type cable lock to protect your Tablet PC against theft. The cable lock is available in computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock.
Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using Action Center (for Windows 7) Action Center alerts you to take action on the following security essentials: z Windows Firewall z Windows Update z Malware Protection (anti-virus, anti-spyware) z Others (Internet security, user account control) For detailed information, see Windows’ online Help.
Taking Care of the Tablet PC Location Guidelines z For optimal performance, use the Tablet PC where the recommended temperature is between 0 qC (32 qF) and 55 qC (131 qF). z Avoid placing the Tablet PC in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using in extreme environments for long periods can result in product deterioration and a shortened product life. z Operating in an environment with metallic dust is not allowed.
z The screen surface is easily scratched. Avoid touching it with a sharp object such as a pen or pencil. z To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that prevents the power management from working. Cleaning Guidelines z Never clean the Tablet PC with its power on.
z Charge the battery pack between 10 qC ~ 30 qC (50 qF ~ 86 qF) temperature range. A higher environment temperature will cause the battery pack’s temperature to rise. Avoid charging the battery pack inside a closed vehicle and in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range. z It is recommended that you do not charge the battery pack more than once a day.
Touchscreen Guidelines z Use the finger or the included stylus on the display. Using a sharp or metallic object other than your finger or stylus may cause scratches and damage the display, thereby causing errors. z Avoid using excessive force that may cause damage to the display. z Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it.
When Traveling z Before traveling with your Tablet PC, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. z Make sure that the battery pack is fully charged. z Make sure that the Tablet PC is turned off. z Disconnect the AC adapter from the Tablet PC and take it with you. Use the AC adapter as the power source and as a battery-charger. z Hand-carry the Tablet PC. Do not check it in as luggage.
Chapter 8 Troubleshooting Tablet PC problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common Tablet PC problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: z Try to isolate which part of the Tablet PC is causing the problem. z Make sure that you turn on all peripheral devices before turning on the Tablet PC. z If an external device has a problem, make sure that the cable connections are correct and secure. z Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). z Make sure that the AC adapter is properly connected. z Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. z Make sure that the battery pack is installed correctly. z Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.
z Make sure that the other device is not in “Hidden” mode. z Make sure that both devices are compatible. Display Problems Nothing appears on the screen. z During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. z The brightness level might be too low. Increase the brightness. The characters on the screen are dim. z Adjust the brightness and/or contrast. Bad dots appear on the display at all times.
Hard Disk Drive Problems The hard disk drive error message appears on the screen. z The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. z The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. The hard disk drive / heater indicator blinks red. z The optional hard disk drive heater is in an abnormal state. Ask for repair service in case this happens.
Power Management Problems The Tablet PC does not enter Sleep or Hibernation mode automatically. z If you have a connection to another computer, the Tablet PC does not enter Sleep or Hibernation mode if the connection is actively in use. z Make sure that the Sleep or Hibernation time-out is enabled. The Tablet PC does not enter Sleep or Hibernation mode immediately. z If the Tablet PC is performing an operation, it normally waits for the operation to finish.
Sound Problems No sound is produced. z Make sure that the volume control is not set too low. Increase the volume. z Make sure that the sound is not muted. z Make sure that the Tablet PC is not in Sleep mode. z If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. z Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.
When you turn on the Tablet PC, it stops after POST. z Reset your Tablet PC. (See “Resetting the Tablet PC” later in this chapter.) Wireless LAN Problems I cannot use the wireless LAN feature. z Make sure that the wireless LAN feature is turned on. Transmission quality is poor. z Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point or another wireless LAN device it is associated with.
I cannot communicate with the computer in the network when Infrastructure mode is configured. z Make sure that the Access Point your Tablet PC is associated with is powered on and all the LEDs are working properly. z If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. z Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point it is associated with.
Resetting the Tablet PC You may have to reset (reboot) your Tablet PC on some occasions when an error occurs and the program you are using hangs up. If the Tablet PC operation seems to hang up, first wait. It is possible that the Tablet PC is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keypad.
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Intel® Cedar Trail N2800 1.86 GHz Chipset Intel® NM10 BIOS Phoenix, 4MB Flash EEPROM RAM 2GB/4GB DDR3-1066 SO-DIMM Video Audio Controller Intel® GMA 3650 Display Panel 10.
Parts Specifications GPS (option) Internal UART WWAN (option) Gobi ™ 3000 3G Mobile Broadband Camera (option) CMOS, 3M pixel Security Kensington lock TPM 1.2 Power AC adapter Universal 65 W; input: 100a240 V, 50/60 Hz; output: 19V Battery Lithium-ion cylindrical battery, 4 cells, 5200mAh Hot Swap technology with backup battery (2 cells) Dimension (LxW×D) 280×184×40mm (11×7.2×1.59 inch) Weight 1.6 kg (3.
Additional Button Definitions Instead of starting up a program, the Menu and P1 buttons provide keyboard key functions for specific occasions as described below.
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your Tablet PC. NOTE: Marking labels located on the exterior of your Tablet PC indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie.
paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. z Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. z Do not use the adapter if the cord becomes damaged. z Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
On the Use of the RF Device NOTE: The information in this section applies to models with the wireless LAN module.
z The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). z The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.
Greek To 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France.
Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements.
