User's Manual

Getting Started 1-3
Installing the Battery Pack and Connecting to AC
Power
The Rugged PC operates either on the external AC power or internal battery power.
It is suggested that you use AC power when starting up the Rugged PC for the
very first time.
CAUTION: Use only the AC adapter included with your Rugged PC.
Using other AC adapters may damage the Rugged PC.
1. Make sure that the Rugged PC is turned off.
2. Place the Rugged PC upside down.
3. Remove the rubber bumper by unfastening 6 screws (as shown below) from
the bumper.