User's Manual

8-8 Troubleshooting
z Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
z Reconfigure and reset the Access Point.
I cannot access the network.
z Make sure that the network configuration is appropriate.
z Make sure that the user name or password is correct.
z You have moved out of range of the network.
z Turn off power management.
Power Management Problems
The tablet PC does not enter Standby or Hibernation mode
automatically.
z If you have a connection to another computer, the tablet PC does not
enter Standby or Hibernation mode if the connection is actively in
use.
z Make sure that the Standby or Hibernation time-out is enabled.
The tablet PC does not enter Standby or Hibernation mode
immediately.
z If the tablet PC is performing an operation, it normally waits for the
operation to finish.
The tablet PC does not resume from Standby or Hibernation mode.
z The tablet PC automatically enters Standby or Hibernation mode
when the battery pack is empty. Do any one of the following:
− Connect the AC adapter to the tablet PC.
− Replace the empty battery pack with a fully charged one.