User's Manual

Operating Your 2-11
Term Action
Click/Point Tap gently on the display.
Right-click Press lightly on the display until a
pop-up menu appears, then select the
desired function.
Double-click Tap twice on the display rapidly.
Drag and
drop
Press lightly on the display and move
your digitizer pen until you reach your
destination (drag). Finally, release your
digitizer pen (drop) when you finish
dragging your selection to the
destination. The object will drop into the
new location.
Erase Press and hold down the digitizer pen
button, then move the cursor pointed by
the digitizer pen to erase.
CAUTION: The active digitizer feature cannot be used in the BIOS Setup program or
when using the full screen in DOS mode.
NOTE:
z You can move the cursor by bringing the digitizer pen close to the screen, without
actually touching the screen’s surface.
z Do not move the digitizer pen too quickly. If the pen moves too quickly, the cursor
may be unable to follow its movement.
z If you cannot click on the edge of the screen, hold the digitizer pen perpendicular to
the display and try clicking again.