User Manual

Troubleshooting 8-9
Power Management Problems
The tablet PC does not enter Standby or Hibernation mode
automatically.
l If you have a connection to another computer, the tablet PC does not
enter Standby or Hibernation mode if the connection is actively in use.
l Make sure that the Standby or Hibernation time-out is enabled.
The tablet PC does not enter Standby or Hibernation mode
immediately.
l If the tablet PC is performing an operation, it normally waits for the
operation to finish.
The tablet PC does not resume from Standby or Hibernation mode.
l The tablet PC automatically enters Standby or Hibernation mode when
the battery pack is empty. Do any one of the following:
- Connect the AC adapter to the tablet PC.
- Replace the empty battery pack with a fully charged one.
Software Problems
An application program does not work correctly.
l Make sure that the software is correctly installed.
l If an error message appears on the screen, consult the software
program’s documentation for further information.
l If you are sure the operation has stop, reset the tablet PC. (See
“Resetting the Tablet PC” later in this chapter.)