User's Manual

apmcomm confidential
apm6658/6659 WiFi 802.11 b/g/n & BT2.1+EDR Dual Radio Module
Product Information Data Sheet
Page 21 of 30
apm Communication, Inc. – TEL: [phone] – FAX: [phone]
Website: http://www.apmcomm.com – E-mail:
[e-mail]
apmcomm Proprietary and Confidential – Product information is subject to change without notice.– May 30 2011
1-9-2 Bluetooth Current Consumption
Conditions: BT_VREGH= BT_VDD_PADS= BT_EN= +3.3V, BT_VREGL = NL, T
OP
= 25°C
Parameter Test conditions Units Min. Typ. Max.
Current Consumption
ACL no traffic Master mA
-
4.3
-
ACL with file transfer Master mA - 8.6 -
ACL no traffic Slave mA - 14.1 -
ACL with file transfer Slave mA - 16.8 -
SCO HV1 Master mA - 45.5 -
SCO HV3 Master mA - 20.5 -
SCO HV1 Slave mA - 45.7 -
SCO HV3 Slave mA - 30.7 -
Inquire mode Master mA - 35.2 -
Standby with host connection Master uA
-
40.1
-
1-10 RF Specification
1-10-1 WiFi RF Specification
Conditions: WL_1V8= WL_VREG_EN= +1.8V, WL_3V3= WL_VDD_PADS_0_7= WL_VSDIO= +3.3 V, T
OP
= 25°C
Parameter Test conditions Units Min. Typ. Max.
802.11b Transmit
Operating frequency range - Ch 1 - Ch 13
Transmit output power 1/2/5.5/11Mbps dBm -
+17
-
Center frequency tolerance ppm -
+5
-
ACPR: 1
st
side lobe power Pout=+17.0dBm, 1/2/5.5/11Mbps dBc -
-42
-
ACPR: 2
nd
side lobe power Pout=+17.0dBm, 1/2/5.5/11Mbps dBc -
-58
-
Transmit EVM 11Mbps, Channel 1~13 % - 7 -
Transmit ramp-up time 10% ~ 90%
μs
-
0.8
-
Transmit ramp-down time 10% ~ 90%
μs
-
1
-
802.11b Receive
Minimum input level sensitivity 11Mbps CCK, FER<8% at PSDU dBm -
-87
-