User's Manual

16
If the network is open, you are prompted to confirm that you want to
connect to that network by touching Connect
Using the Bluetooth Function
NOTE: Getac does not guarantee the product’s compatibilities with the
Bluetooth headsets/devices from all manufacturers.
Turning On/Off the Bluetooth Radio
Go to Quick Settings and touch the Bluetooth icon.
- Or –
Go to Settings. Find the Bluetooth item under WIRELESS & NETWORKS. Slide
the Bluetooth switch on or off.
When the Bluetooth radio is turned on, the icon appears in the status bar.
Pairing with a Bluetooth Device
The first time you use a new Bluetooth device with your device, you must
“pair” them, so that they know how to connect securely to each other. After
that, you can simply connect to a paired device.
1. Make sure that the other Bluetooth device is set as “discoverable” and
within range.
2. Make sure the Bluetooth radio is on (as described in the previous
section).
3. Go to Quick Settings and touch the down arrow of the Bluetooth item.
- Or -
Go to Settings. Touch Bluetooth.
4. Your device scans for and displays the IDs of all available Bluetooth
devices in range.
5. On the list of discovered devices, touch the ID of the device you want to
pair with.
6. The devices pair with each other. If you’re prompted to enter a passcode,
try entering 0000 or 1234 (the most common passcodes), or consult the
documentation that came with the device to learn its passcode.
If the pairing is successful, your device connects to the device.