User's Manual

AP6234 Datasheet
AMPAK Technology Inc. www.ampak.com.tw
Proprietary & Confidential Information
Doc. NO:
4
2. Features
IEEE 802.11x Key Features
• Dual-band 2.4GHz/5GHz 802.11a/b/g/n.
• Single-stream IEEE 802.11n support for 20MHz and 40MHz channels
provides PHY layer rates up to 150Mbps.
• WLAN host interface options: SDIO v2.0 — up to 50 MHz clock rate
• Support a single antenna shared between WLAN and Bluetooth.
• Security: WEP, WPS, WPA, WPA2, WMM, WAPI, AES,…
Bluetooth Features
• Bluetooth V4.0(BLE) Low Energy with provisions for supporting future
specifications.
• Bluetooth Class1 or Class2 transmitter operation.
• BT host digital interface UART(up to 4 Mbps) with support all Bluetooth4.0
package types
• Multipoint operation with up to seven active ACL links, three active SCO and
eSCO connections.
• Full support for power savings modes (standard sniff, deep sleep modes)
• ECI - enhanced coexistence support, ability to coordinate BT SCO
transmissions around WLAN receives
A simplified block diagram of the module is depicted in the figure below.