User's Manual

TRF7970A
www.ti.com SLOS743K –AUGUST 2011–REVISED APRIL 2014
6.14.3.2 Control Registers – Sub Level Configuration Registers
6.14.3.2.1 ISO14443 TX Options Register (0x02)
Table 6-29. ISO14443 TX Options Register (0x02)
Function: Selects the ISO subsets for ISO14443 – TX
Default: 0x00 at POR = H or EN = L
Bit Name Function Description
B7 egt2 TX EGT time select MSB
Three bit code defines the number of etu (0-7) which separate two characters.
B6 egt1 TX EGT time select
ISO14443B TX only.
B5 egt0 TX EGT time select LSB
1 = EOF→ 0 length 11 etu
B4 eof_l0
0 = EOF→ 0 length 10 etu
1 = SOF→ 1 length 03 etu
B3 sof_l1
0 = SOF→ 1 length 02 etu
ISO14443B TX only
1 = SOF→ 0 length 11 etu
B2 sof _l0
0 = SOF→ 0 length 10 etu
1 = EGT after each byte
B1 l_egt 0 = EGT after last byte is
omitted
1 = ISO14443A Layer 4
compliant (in SAK
For use with Auto SDD configuration, makes B6 in ISO14443A response 1 or 0,
B0 Auto SDD_SAK response)
indicating Layer 4 compliance (or not), for all other cases, this bit is unused
0 = Not Layer 4 compliant
(in SAK response)
6.14.3.2.2 ISO14443 High-Bit-Rate and Parity Options Register (0x03)
Table 6-30. ISO14443 High-Bit-Rate and Parity Options Register (0x03)
Function: Selects the ISO subsets for ISO14443 – TX
Default: 0x00 at POR = H or EN = L, and at each write to ISO Control register
Bit Name Function Description
TX bit rate different from RX
B7 dif_tx_br Valid for ISO14443A/B high bit rate
bit rate enable
B6 tx_br1 tx_br1 = 0, tx_br = 0 → 106 kbps
tx_br1 = 0, tx_br = 1 → 212 kbps
TX bit rate
tx_br1 = 1, tx_br = 0 → 424 kbps
B5 tx_br0
tx_br1 = 1, tx_br = 1 → 848 kbps
1 = parity odd except last
B4 parity-2tx
byte which is even for TX
For 14443A high bit rate, coding and decoding
1 = parity odd except last
B3 parity-2rx
byte which is even for RX
B2 Unused
B1 Unused
B0 Unused
Copyright © 2011–2014, Texas Instruments Incorporated Detailed Description 59
Submit Documentation Feedback
Product Folder Links: TRF7970A