Integration Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
45
Using Storage and Expansion
Cards
Using MicroSD Cards
Your computer has a storage card reader. The card reader is a small drive for
reading from and writing to removable storage cards (or called memory
cards). The reader supports microSD (Secure Digital) and microSDHC (Secure
Digital High Capacity) cards.
1. Locate the microSD card reader. Open the cover.
2. Align the card with its connector pointing to the slot and the connector
side facing back. Slide the card into the slot until it reaches the end.
3. Close the cover.
4. Windows will detect the card and assign it a drive name.
To remove a storage card:
1. Open File Explorer and click Computer.
2. Right-click the drive with the card and select Eject.
3. Open the cover.
4. Slightly push the card to release and then pull it out of the slot.
5. Close the cover.