User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
78
1. Connect the AC adapter.
2. Turn on the Tablet PC. During system startup when the Getac logo screen
appears, double-tap the screen. In the menu that appears, select HDI
Recovery.
Or, if a keyboard is connected, you can press Ctrl + Alt + F2 keys for four
seconds instead of tapping the screen.
3. In the screen that appears, select Recovery to start the recovery process.
4. The progress bar shows the percentage completed. When it reaches
100%, the system turns off.
5. Turn on the Tablet PC. The Windows setup wizard starts. Follow the
onscreen prompts to continue.
6. When the system restarts, the installer screen appears. The installer will
perform system hardware detection and driver installation.