User's Manual

Intel® Centrino® Wireless-N 105 (Canyon Peak)
Intel® Centrino® Wireless-N 135 (Canyon Peak w/Bluetooth)
Intel® Centrino® Wireless-N 2200 (Marble Peak)
Intel® Centrino® Wireless-N 2230 (Jackson Peak 1)
Intel® Centrino® Advanced-N 6235 (Jackson Peak 2)
Hardware Specification, Rev. 2.2
Intel Confidential
473288
7
1 Introduction
The Intel® Centrino® Wireless Products include the following products:
 Intel® Centrino® Wireless-N 105  code name Canyon Peak (CyP)  is a discrete 1x1
Wi-
th
generation 802.11n Wi-Fi
solution and supports 2.4GHz band. It operates on a 40MHz wide channel, reaching
PHY rates of up to 150Mbps.
 Intel® Centrino® Wireless-N 135  code name Canyon Peak w/Bluetooth (CyP w/BT)
 is the Wireless LAN (Wi-Fi) and Bluetooth (BT) combination product that supports
WiFi 1x1 802.11n in the 2.4GHz band. It operates on a 40MHz wide channel, reaching
PHY rates of up to 150Mbps. Canyon Peak w/Bluetooth uses CSR Bluetooth 8
th
generation core that supports Bluetooth 3.0 standard, and Bluetooth low energy
technology (BLE). In addition, Canyon Peak w/Bluetooth supports the Bluetooth 4.0
standard (which includes BLE and Bluetooth 3.0+HS)
 Intel® Centrino® Wireless-N 2200  code name Marble Peak (MP)  is a discrete 2x2
Wi-Fi single chip solution. Marble 
th
generation 802.11n WiFi
solution and supports the 2.4GHz band. It operates on a 40MHz wide channel,
reaching PHY rates of up to 300Mbps.
 Intel® Centrino® Wireless-N 2230  code name Jackson Peak1 (JP1)  is the Wireless
LAN (Wi-Fi) and Bluetooth (BT) combination single chip supporting the 2.4GHz band.
It operates on a 40MHz wide channel, reaching PHY rates of up to 300Mbps. In
addition, Jackson Peak1 supports Bluetooth 4.0 standard (which includes BLE and
Bluetooth 3.0+HS).
 Intel® Centrino® Advanced-N 6235  code name Jackson Peak2 (JP2)  is a Wireless
LAN (WiFi) and Bluetooth (BT) combination dual chip solution supporting both 2.4GHz
and 5GHz bands. It operates on a 40MHz wide channel, reaching PHY rates of up to
300Mbps. Jackson Peak2 supports Bluetooth 4.0 standard (which includes BLE and
Bluetooth 3.0+HS).
 Table 1 summarizes the differences between the different products.
Table 1: Feature Differences Between Intel® Wireless Products
Feature
Jackson Peak 1
Jackson Peak 2
Canyon Peak /
Canyon Peak
w/Bluetooth
Marble Peak
Wi-Fi
standard
2x2 bgn
2x2 agn
1x1 bgn
2x2 bgn
Antennas
2
2
2
2
Wi-Fi TX
chains
2 chain
2 chains
1 Chain
2 chains
Wi-Fi RX
Chains
2 chains
2 Chains
1 chain
2 Chains
Antenna
Diversity
N/A
N/A
Enabled when Bluetooth
is inactive
N/A