User's Manual
Intel® Centrino® Wireless-N 105 (Canyon Peak)
Intel® Centrino® Wireless-N 135 (Canyon Peak w/Bluetooth)
Intel® Centrino® Wireless-N 2200 (Marble Peak)
Intel® Centrino® Wireless-N 2230 (Jackson Peak 1)
Intel® Centrino® Advanced-N 6235 (Jackson Peak 2)
Hardware Specification, Rev. 2.2
Intel Confidential
473288
57
13 HW RF Kill Considerations
The Wi-Fi RF Kill is supported via Pin #20 (W_Disable), and this is similar to previous
products.
The Bluetooth RF Kill is supported via Pin #51 (W_Disable#2)
Since both RF Kill signals are active low, and there is an internal pull up this means that they
can be left not connected, and both Wi-Fi and Bluetooth will be enabled.
To disable the BluetoothVil = 0.0v [+/-0.3]) should be applied to the
W_disable#2 pin.
To disable the Wi-Vil = 0.0v [+/-0.3]) should be applied to the W_disable# pin.
In order to test Intel Wireless on legacy platforms (prior to Huron River), the W_disable#2 pin
If for any reason, the W_disable#2 pin tform then Bluetooth
would be disabled.