User's Manual

Intel® Centrino® Wireless-N 105 (Canyon Peak)

Intel® Centrino® Wireless-N 135 (Canyon Peak w/Bluetooth)

Intel® Centrino® Wireless-N 2200 (Marble Peak)

Intel® Centrino® Wireless-N 2230 (Jackson Peak 1)

Intel® Centrino® Advanced-N 6235 (Jackson Peak 2)

Hardware Specification, Rev. 2.2

Intel Confidential

473288

6 LED Indicators

JP1, JP2, CyP+Bluetooth products have 2 LEDs signals each: A Bluetooth LED, and a Wi-Fi

LED.

MP, CyP products have WiFi LED only (no Bluetooth supported)

The signals are open drain.

The Bluetooth LED functionality is as described below:

1. LED is OFF when the Bluetooth is in HW RF Kill (including idle, SW RF Kill = driver disable,

etc.).

2. LED is ON otherwise

The Wi-Fi LED functionality is as described below:

1. LED is OFF when the Wi-Fi is not powered

2. LED is ON when Powered, associated, and authenticated but not transmitting or receiving.