User's Manual

Intel® Centrino® Wireless-N 105 (Canyon Peak)
Intel® Centrino® Wireless-N 135 (Canyon Peak w/Bluetooth)
Intel® Centrino® Wireless-N 2200 (Marble Peak)
Intel® Centrino® Wireless-N 2230 (Jackson Peak 1)
Intel® Centrino® Advanced-N 6235 (Jackson Peak 2)
Hardware Specification, Rev. 2.2
Intel Confidential
473288
20
Scan
Period
Marble
Peak
(mW)
LB
Jackson
Peak 1
(mW)
LB
Jackson
Peak 2
(mW)
LB+HB
Jackson
Peak 2
(mW)
LB
180s
24.59
31.71
49.88
41.62
300s
22.76
29.82
44.73
39.77
600s
21.38
28.41
40.86
38.39
1200s
20.69
27.71
38.93
37.69
Table 7: Power Consumption – AMT States
Power Consumption
Name
Description
JP2
AMT8.0 Power Consumption S0-
Hx / M0, Mla, Rx
AMT is taking ownership of the NIC in Hx,
while actively receiving Legacy (802.11g)
mode. Traffic Scenario of TCP/IP, 1 Rx
chain, No aggregation
920
AMT8.0 Power Consumption S0-
Hx / M0, Mla, Tx
AMT is taking ownership of the NIC in Hx,
while actively transmitting in Legacy
(802.11g) mode. Traffic Scenario of TCP/IP,
1 Tx chain, No aggregation
960
AMT8.0 Power Consumption S0-
Hx / M0, MLs, Host driver
enabled
AMT is taking ownership of the NIC in Hx,
while idle between Tx and Rx and Host
Driver is enabled. Test conditions: PC at
room temperature, Two minutes average,
Max Power Save Mode, One Scan.
135
AMT8.0 Power Consumption S0-
Hx / M0, MLs, Host driver
disabled
AMT is taking ownership of the NIC in Hx,
while idle between Tx and Rx, and Host
Driver is disabled. Test conditions: PC at
room temperature, Two minutes average,
Max Power Save Mode, One Scan.
155
AMT8.0 Power Consumption S0 /
M0-idle Driver disabled
AMT is taking ownership of the NIC and the
Host driver is disabled. Test conditions: PC
at room temperature, Two minutes average,
Max Power Save Mode, One Scan.
120
AMT8.0 Power Consumption Sx-
PP3(M1), LP=31
AMT is taking ownership of the NIC in Sx, at
idle associate state power down.
100
AMT8.0 Power Consumption Sx,
PP2( Moff) LP=31WoWLAN
AMT is taking ownership of the NIC in Sx,
and WoWLAN is enabled
150
3.3.4 Bluetooth Power Consumption
Canyon Peak w/BT, Jackson Peak 1, Jackson Peak 2 Bluetooth core shall have the following
power consumption as listed in the table below.
Tests conditions:
 Module will be installed as an embedded module in a laptop
 Bluetooth COM only. WiFi shall be disabled by using driver disable from device
manager. AMT shall be disabled.