User's Manual

Operating Your Computer 2-29
Turning On/Off the WWAN Radio
To turn on the WWAN radio:
1. Make sure that the RF switch is at the ON position.
2. To turn on the WWAN radio, click the WWAN button in the Quick Bar as
shown below (an X over the button means the radio is currently off.)
When the WWAN radio is on, the WWAN indicator (
) glows in green.
NOTE: The Quick Bar appears on Windows desktop by default. If it is not
open, you can right-click the Getac Utility icon (
) located on Windows
taskbar and select Quick Bar to open it.
To turn off the WWAN radio:
You can turn off the WWAN radio by using the Quick Bar or WWAN utility.
If you want to turn off all wireless radio, slide the RF switch to the OFF
position.